Char-Lynn Power Steering Parts-

Fits Models which use a 7/8" steering shaft: Fits MM: MODELS USING 7/8" DIAMETER STEERING SHAFT
Fits Oliver: 66, SUPER 66, 660, 70, 77, SUPER 77, 770, 88, SUPER 88, 880 & OTHER MODELS USING 7/8" STEERING SHAFT
Other Info: IF ONLY BUYING THIS PIECE, ALSO NEED PORT BLOCK UT20085
Dimensions & Notes: STANDARD --- FOR WHEN PULLING A WAGON --- TORQUE OUTPUT AT 1000 PSI = 700 IN LBS, 7/8" SHAFT --- RATED OPERATING PRESSURE = 1000 PSI --- MAX. OPERATING SPEED AT 3 GPM = 108 RPM --- RECOMMENDED FLUID INPUT

Fits Models which use a 7/8" steering shaft: Fits MM: MODELS USING 7/8" DIAMETER STEERING SHAFT
Fits Oliver: 66, SUPER 66, 660, 70, 77, SUPER 77, 770, 88, SUPER 88, 880 & OTHER MODELS USING 7/8" STEERING SHAFT
Dimensions & Notes: HEAVY DUTY IF ONLY USING THIS PIECE, ALSO NEED PORT BLOCK, UT20085
FOR WHEN A FRONT LOADER IS USED TORQUE OUTPUT AT 1000 PSI = 1100 IN LBS RATED OPERATING PRESSURE = 1000 PSI MAX. OPERATING SPEED AT 3 GPM = 65 RPM RECOMMENDED FLUID INPUT = 3 TO 4 GPM 7/8" SHAFT

Dimensions & Notes: WHEN EQUIPPED WITH CHAR-LYNN ADD-ON POWER STEERING -- USE THIS COUPLER IF A UNIVERSAL JOINT IS NEEDED ON THE STEERING SHAFT

USE ONLY IF YOU HAVE A UNIVERSAL JOINT AT ONE END OF EXISTING STEERING SHAFT

Needed if only the torque generator is purchased

Dimensions & Notes: ELIMINATES BELT DRIVEN PUMP, PULLEYS & BRACKETS. ENABLES YOU TO USE YOUR LIVE HYDRAULIC PUMP TO OPERATE THE POWER STEERING. --- MUST BE USED W/ LIVE HYD. --- 3/4" INLET & RETURN --- 1/2" PRESSURE PORT -- PRE SET AT 1500 PSI, ADJUST TO YOUR APPLICATION
Fits International: H, SUPER H, HV, SUPER HV, M, SUPER M, MD, MTA, MV, MDV, SUPER MV, SUPER MDV, W4, W6, W9, WD6, SUPER W6, SUPER W4, SUPER W6, SUPER W9, WR9, WD9, SUPER W6TA, SUPER W6TA DSL, SUPER WDR9, 300, 350, 400, 450

Replaces number 204827