Drawbar

B275, B414, 424, 444, 354, 364, 384, 3414, 2424, 2444
Freight Applies-Requires additional shipping

Replaces: 43525DAXA
Fits: A

Replaces number 360632R1, 357530R1
53.25 inch long x 3/4 inch thick
Fits: H, Super H, 300, 350

Replaces number 49200DB, 357529R1, 359177R2
53.75 inch long x 2.5 inch wide x 1 inch thick
Fits: M,Super M,MD,Super MTA

Replaces number 517829R11
2.5 inch tall points
Fits: C, Super C, 200, 230, 240

Replaces number 520021R11, 383492R11, 523089R91
3 inch tall points
Fits: 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 656, 706, 756
766, 806, 826, 856, 966, 1026, hydro 70, 100,

Replaces number 3111194R1
Fits: 2300A, 354, 364, 384, 444
35.750" long x 2.375" wide x 1.187" high x 2.125" offset
(1) 1.180" dia hole 1.312" from front

Replaces number 3116100R2
Fits: 385, 484, 485
38.000" long x 2.000" wIde x 1 .187" high
2) 1.000" dia holes @ 1.187" 3.187" from front.
2 Drawbar Pins available for this drawbar depending on length (UT5090 and UT5091)

Replaces number 406467SPL
Fits: 2400, 385, 395, 454, 464, 485, 495, 574, 585, 595, 674, 684, 685, 885, 895
38.000" long x 2.250" wide x 1 .375" high
4) 1.008" dia holes @ 1.200", 3.200", 4.900",6.900" from front.
2 Drawbar Pins available for this drawbar depending on length (UT5090 and UT5091)

Replaces number 389099R1
Fits: 544, 656, 666, 686, Hydro 70, Hydro 86
26.25 in. long x 2.5 in. wide x 1.5 in. height
(2) 1.040" Dia. holes @ 6.390" & 8.390" from front
1 Drawbar Pins available for this drawbar-Connects Drawbar to Drawbar tube (UT5092)
Drawbar Tube (UT5040)
Drawbar Tube to Tractor Pin (UT5093)

Replaces number 397065R1
Fits: 1026, 756, 766, 826 ALL sn <-13892, 966 sn <-270896, 706 with 3 point and sn 19250->
806 with 3 point and sn 14500 thru 23000
26.250" long x 2.500" wide x 1 .500" high
1) 1.040" dia hole 10.500" from front of bar.
1 Drawbar Pins available for this drawbar-Connects Drawbar to Drawbar tube (UT5094)
Drawbar Tube (UT5041)
Drawbar Tube to Tractor Pin (UT5093)
Drawbar Tube to Tractor Pin Lock Plate (UT5094LP)

Replaces number 381706R2
Fits: 1026, 756, 766, 826 ALL sn <-13892, 966 sn <-270896, 706 with 3 point and sn 19250->
806 with 3 point and sn 14500 thru 23000
45.750" long x 2.500" wide x 1 .500" high
(2) 1.165" dia holes @ 1.500" & 10.500' from front.
Note: This bar can replace 2 piece original drawbar
Drawbar to Tractor Pin (UT5093)
Drawbar to Tractor Pin Lock Plate (UT5094LP)

Replaces number 397066R1
Fits: 1206, 1256, 1456, 766 All sn 13892->), 966 sn 270896->
38.750" long x 2.500" wide x 1 .500" high
(2) 1.040" dia holes 22.500" & 28.000" from front of bar.
1 Drawbar Pins available for this drawbar-Connects Drawbar to Drawbar tube (UT5094)
Drawbar Tube (UT5042)
Drawbar Tube to Tractor Pin (UT5093)
Drawbar Tube to Tractor Pin Lock Plate (UT5094LP)

Replaces number 535799R1
Fits: 1066
38.750" long x 2.500" wide x 1 .500" high
1.145" dia hole 1.5" from end, .687" dia hole 5.51" from end, 656" dia
hole 6.92" from end, 1.031" dia hole 14.12" from end.

Replaces number 223351, 72476C1, 103502C1
Fits: 06 SERIES, 56 SERIES, 66 SERIES, 86 SERIES
56.000" long x 2.750" wide x 1 .500" high
1) 1.385" dia hole, 1.500" from front.
Drawbar Pin to Tractor (UT5095)

Replaces number 223352, 72571C1, 108504C1
Fits: 06 SERIES, 56 SERIES, 66 SERIES, 86 SERIES
58.125" long x 2.750" wide x 1 .500" high
1) 1.390" dia hole 1.875" from front

Replaces number 223353
Fits: 06 SERIES, 56 SERIES, 66 SERIES, 86 SERIES
62.250" long x 3.000" wide x 1 .500" high
3) 1.390" dia holes @ 1.750", 5.937", 15.312" from front
Drawbar Pin to Tractor (UT5095)
Drawbar Hammerstrap (UT5045)
Drawbar Hammerstrap Spacer (UT5045SP)

Replaces number 142617C4
Fits: 5088
58.500" LONG x 3.00" WIDE x 1.500" THICK x 2.250" OFFSET

Replaces number 1332020C3
Fits: (5120, 5130, 5140, 5220, 5230, 5240, 5250 ALL Early Production)
50.750" long x 2.375" wide x 1.562" high

Replaces number 1286970C3
Fits: 7110, 7120, 7210, 7220, 8910, 8920
58.690" long x 3.000" wide x 1.500" high
(4) front holes @ 1.445", 5.445", 9.445", 12.930" front front.

Replaces number 1286969C3
Fits: 7130, 7140, 7150, 7230, 7240, 7250, 8930, 8940, 8950
60.620" long x 3.000" wide x 1 .750: high
4) front holes @ 1.406", 5.473", 9.473", 14.850" front front

Replaces number 104642A2
Fits: MX100, MX110, MX120, MX135, (5120, 5130, 5140, 5220, 5230,
5240, 5250 ALL Late Production)
60.620" long x 3.000" wide x 1 .750: high
4) front holes @ 1.406", 5.473", 9.473", 14.850" front front